Scripting

Warning: incorrect scripts usage might break everything. Use with caution and always test your scripts!

To make use of scripting system you need to create script file in "Data/Scripts". It's a simple text file with ".script" extension (if you don't have extensions enabled in explorer, then you should do it right now. If you're not willing to, you'll have to find an example script file somewhere and edit it). Script file name can be:

• MapName.script - where "MapName" is... well, name of the map you want to bind this script to.
• DecorationName.script - where "DecorationName" is name of decoration you want to bind this script to. This script will be used when player is near decoration and presses use.
• Any other script will be loaded only if it was set in triggers or terminals settings (see "Triggers")

The scripting language is very simple to use:

Commands are written each on its own line. Any argument these commands need should be separated by a single whitespace. That's it, commands are executed in order top to bottom of the file.

Example:

image Character Sprites/Characters/Character.png

show Character 0 0 2

text "Hello World!"

hide Character 2

timeout 2

map start

This script will load image, set it's name as Character, show it at 0, 0 within 2 seconds, show text on screen, hide image within 2 seconds, set timeout for 2 seconds start the map.

Variables

A variable is a name that you can bind a certain value to. There are three kinds of variables:

• Global - available entire game disregarding of map player currently plays.
• Map variables - available during current map. Deleted after it's over.
• Local variables - available only during current script. Deleted after it's done working.

To set a variable you just need to write it's name and a value, separated by "=". "global." prefix is for global variables, "map." is for map variables:

global.value=10

map.value="Character"

value=10

To use a variable you need to put $ symbol before it's name:

text "$global.value"

image $map.value Sprites/Characters/Character.png

text "$value"

If you need to calculate something (and variable is a number) use next operators:

value+=2 //Addition

value-=2 //Subtraction

value*=2 //Multiplication

value/=2 //Subdivision

value++ //Increment (increase by 1)

value-- //Decrement (decrease by 1)

Be aware that beginning of one variable's name can't contain the full name of the other variable. For example:

global.count=10 global.countnumber=5

It's a wrong way to name variables, because now you can't interact with "global.countnumber" variable - the game engine will always refer to the "global.count" variable first, ignoring the "-number" part on the end. We can easily fix it by changing the letter order:

global.count=10 global.numbercount=5

Conditions

Conditions are blocks of code that will be executed only if some conditions are met. Be aware: "if", and comparator are commands as well, so there MUST be whitespace separating them:

if $value == 1 {

map next

} else {

map goto 3

}

Code inside if block will be executed only if value is 1. Code inside "else" block will be executed if value is NOT 1. Else block may be imotted if you don't need it:

if $value == 1 {

map next

}

Instead of "==" you can use:

• != - condition is met if value is NOT equal
• <= - condition is met if value is less or equal
• >= - condition is met if value is greater or equal
• < - condition is met if value is less
• > - condition is met if value is greater

Procedures

Procedures are pieces of code that can be used whenever you want. Key word "end" marks procedure end, so be sure there is enough of these:

procedure helloworld

text "Hello World!"

end; //semicolon in necessary if you have more than one procedure

procedure helloworld2

text "Hello World 2!"

end

Calling a procedure is just a matter of using command "call":

call helloworld call helloworld2

Procedures exist only inside one single file. If you need them in another file, you'll have to copy them. You can also call procedures from inside other procedures or the very procedure itself. For example:

procedure loop

map.var++

if $map.var == 100 {

map return

} else {

call loop

}

end

This procedure will repeatedly call itself to increment variable "map.var" by one until it would be equal to 100. After that procedure stops the execution of the script.

All procedures must be in the beginning of the script. They wont work when placed after or in the middle of the script.

Commentaries

If you put "//" in front of a line this line will become a commentary - a non-executable code that is just here to set a note for yourself.

//This is a commentary call helloworld

Live Variables in HUD:

Live Variables on screen.

Addin a live variable in to the hud is quite straight forward however at the current time it does crash the game on load.

Open up the HUD config file and add the following two lines.

The first numeric value is the position on the screen left to right and the second one is vertical position

text 0.01 0.8 (variable name)

variable 0.075 0.8 (global.example)

Live Variable Example from JessicoChan

Generic commands list:

Please note that rectangular braces are here just to mark an argument. You do not need to put them yourself.

auto

auto [0/1] - sets auto execution. By default script is executed line-by-line as player presses left mouse button or use button.

timeout

timeout time - sets timeout. Next script line will be executed automatically when timeout is over.

call

call procedureName - calls a procedure.

pause

pause - pauses script until mouse button is pressed or a use key is pressed.

halt

halt - stops script entirely.

keeptrigger

keeptrigger - prevents trigger that called the script from being deleted when the script ends.

Game commands list:

map

map start [keepmusic] - starts map after cutscene script is over. Must only be used in cutscenes at the start of a map! If keepmusic is 1 - music played in the cutscene will be played on map as well. If it's 0 or omitted, map music will be played.

map next - moves to the next map.

map return [KeepSounds? 0/1/2/3] - return to map. Use only in triggers, terminals or active decorations with scripts. KeepSounds: 0 stops all sounds, 1 keeps music, 2 keeps music and sfx , 3 keeps scripted sounds

map quickreturn [KeepSounds? 0/1/2/3] - return to map without interrupting player input, enabling keybind scripts to run repeatedly while held, and avoiding input delay when a trigger is activated

map goto [index] - moves to a certain map. index - map number in the list (starting from 0).

experimental ability to run a looping script in the background.

If you have a mapname_loop.script, it will run continuously in the background while you're on that map. For now, I don't recommend using this in any games you're about to release. It's more like a public beta test. This feature may be changed, or run at a fixed time interval in a future update.

	Player and entity commands
player	player player heal [amount] - heals player. player hurt [amount] - hurts player. player teleport [tileX] [tileY] [tileZ] [relative? 0/1] - moves player to tile coordinates (0 to 63). tileY is floor number (0 to 8). TileX and tileZ can be seen in the editor. If relative is set to 1, the destination will be relative to the player's current position player move [offsetX] [offsetY] [offsetZ] - shifts player to a certain number of units. player rotation [angleX] [angleY] - sets camera rotation. angleX is up-down rotation (0 - front, 90 - up). angleY is sideways (0 is to the right, 90 is up on the map) player retro [0/1] - if 1, deactivates player and weapon viewbob. player turn [0/1] - if 1, deactivates mouse usage and strafing. player steps [0/1] - if 0, deactivates footsteps sound. player speed [value] - changes player speed. player sethp [value] - directly set the player's hp without triggering flashes. player setmaxhp [value] - set the player's max hp. player givearmour [value] - gives armour to the player.. player takearmour [value] - takes armour from the player. player setarmour [value] - set the player's armour. player setmaxarmour [value] - set the player's max armour. player cancrouch [0/1] - set whether the player can crouch. player canjump [0/1] - set whether the player can jump. player height [walk/crouch] [value] - set the player's walk or crouch height. Default walk height is 42. Default crouch height is 25.2 player weapon holster - holsters the current weapon without removing it player zoom [value] - Sets the zoom/fov to use (0 = normal, 100 = max zoom, -100 = min zoom) player camspeed [value] - Sets the multiplier to use for camera turning speed (1 = normal, 0.5 = half, etc) player check hp [variable] - sets variable to the player's current health. player check maxhp [variable] - sets variable to the player's max health. player check armour [variable] - sets variable to the player's current armour. player check maxarmour [variable] - sets variable to the player's max armour. player check key [number] [variable] - sets variable to 1 or 0, indicating if the player has key[number]. player check weapon [slot] [variable] - sets variable to 1 or 0, indicating if the player has weapon[slot]. player check ammo [slot] [variable] - sets variable to the total amount of ammo in weapon[slot]. player check mag [slot] [variable] - sets variable to the amount of ammo in weapon[slot]'s mag. player check heldweapon [variable] - sets variable to the currently selected weapon slot. player check position [varX] [varY] [varZ] - sets variable x/y/z to the player's current position. player check rotation [varX] [varY] - sets variable x/y to the player's current x/y rotation. (y-axis rotation is for
entity	entity delete [tileX] [tileY] [tileZ] - deletes entity in a certain tile. tileZ is floor number. entity delete me - deletes entity that called a script (or decoration that player used). entity move [tileX] [tileY] [tileZ] [offsetX] [offsetY] [offsetZ] - shifts entity. entity spawnat [enemyname/decorationname/Key1-3/Hp1-3] [tileX] [tileY] [tileZ] - creates entity at tile coordinates (as shown in map editor). entity spawnatpos [enemyname/decorationname/Key1-3/Hp1-3] [X] [Y] [Z] - creates entity at a certain number of units.
door	door open [tileX] [tileY] [tileZ] [stay? 0/1] - opens a door in a tile. If stay is set to 1, the door will only close again with a script. door close [tileX] [tileY] [tileZ] - closes a door. door lock [tileX] [tileY] [tileZ] - locks a door. It will not open by player ever, only through script. door unlock [tileX] [tileY] [tileZ] - unlocks a door.
light	light create [tileX] [tileY] [tileZ] [radius] [r] [g] [b] - creates a light source at tile coordinates (as shown in map editor) with your own preferences. light move [tileX] [tileY] [tileZ] [offsetX] [offsetY] [offsetZ] - shifts any light source. light status [on/off] [tileX] [tileY] [tileZ] - turns on/off any light source.
status	status [string] [time] - shows a text for a certain amount of time.
give	give weapon [slot] - gives weapon to a slot (1 - 8). give ammo [slot] [amount] - gives ammo for a slot. give key [number] - gives key to the player.
take	take weapon [slot] - takes weapon from a slot (1 - 8). take ammo [slot] - takes ALL ammo from a slot. take key [number] - takes key from player.
cursor	cursor [1/0] - shows or hides a cursor. Not supposed to work while showing text with "vn" on.
shader	shader set [name] - sets current shader. Default shader name is - "default". shader set [name] [path] - loads a shader, sets it's name and sets it as a current one (vert and frag shaders should be placed in Data/Shaders).
game	game save slot [1-8] - saves game to a slot. game save auto - saves game to autosave slot. game load slot [1-8] - loads game from a slot. game load auto - loads game from autosave slot.
gravity	gravity [strength] - sets the strength of the gravity (default is 970)
weapon	weapon maxammo [slot] [value] - sets the max ammo of weapon[slot] to [value] weapon magsize [slot] [value] - sets the max magazine size of weapon[slot] to [value] weapon damage [slot] [value] - sets the damage of weapon[slot] to [value] weapon firerate [slot] [value] - sets the fire rate of weapon[slot] to [value] weapon bullets [slot] [value] - sets the bullet count of weapon[slot] to [value] weapon reloadspeed [slot] [value] - sets the reload speed weapon[slot] to [value] weapon projectilespeed [slot] [value] - sets the projectile speed of weapon[slot] to [value] weapon explosion [slot] [value] - sets the explosion radius of weapon[slot] to [value] weapon recoil [slot] [value] - sets the recoil of weapon[slot] to [value] weapon spread [slot] [value] - sets the spread of weapon[slot] to [value] weapon recoilrecovery [slot] [value] - sets the recoil recovery of weapon[slot] to [value]
HUD	Animated Hud Examplehud image [imageName] [x] [y] [scale] [path] [layer] - Creates or updates a hud image. Using the same imageName will replace the previous hud image with that name. Higher layer images will be rendered on top of lower-layer images. Calling 'hud image [imageName]' without any other parameters will remove the specified hud image.

	Cutscene commands list:
vn	vn [1/0] - enables or disables visual novel mode.
text	text [string] [r] [g] [b] - places text on screen (or in a textbox of VN mode is enabled) with a set color (if omitted color will be white).
font	font [size] - sets font size
preload	preload [1/0] - enables or disables images preloading. Disable to save memory. Recommended on long cutscenes.
image	image [name] [path] - loads an image and sets it's name. Path may be anything in scope of your project folder (omit ProjectName/ part. For example "Images/Image.png" will tell engine to look into "ProjectName/Images/Image.png")
sound	sound [name] [path] - loads sound and sets it's name. Path rules are the same as for images.
show	show [imageName] [x] [y] [time] - shows image within set time. imageName is the name that was set to an image when loading. If time is 0 or omitted then image will be shown immediately.
bg	bg [imageName] [time] - shows background within set time. Unlike images bgs are stretched to fill entire screen.
hide	hide [imageName] [time] - hides image within set time. Including backgrounds and buttons. imageName is name of image that was set when loading.
play	play sound [name] - plays sound with a name that was set when loading. play music [path] - plays music. Path rules are the same as for sounds and images. play video [path] - plays video. Currently only supports efpse .vid files.
stop	stop music - stops cutscene music. You can't stop map music. stop sound [name] - stop the specified sound. stop sounds - stop all played sounds.
button	button [imageName] [x] [y] [procedurename] - shows button that will call procedure upon clicking on it. Button image should consist of three images in a row. The first one is for button when it's not pressed and cursor is not over it. Second is when cursor is over it. Third - when it's pressed.
label	label imageName [x] [y] [string] [size] [r] [g] [b] [center/left/right] - places text on any place of the screen.
move	move [imageName] [x] [y] [time] - moves image to certain coordinates within time.
front	front [imageName] - moves image in front of everything else.
back	back [imageName] - moves image to the back. There is also exactly one special command that is used only in menu script:
bind	bind [button] [scriptname] - bind a script that will be executed when a button is pressed. Script file should be placed in ProjectName/Scripts.